Sony MDS-JE770 - Manual (Page 18)

masterpage:Left
(3 column)
filename[\\WIN-48\NAKAYAMA 3-1\4233926121 3.14\423392612MDSJE770U2\GB05OPE-
U2.fm]
18
model name1[MDS-JE770] model name 2 [MDS-JE470]
[4-233-926-12(1)]
Recording tips (continued)
When a digital input is selected
The digital signal input from the DIGITAL
IN connector is output to the DIGITAL OUT
connector (MDS-JE770 only) after passing
through the sampling rate converter, and
then to the ANALOG OUT jacks and
PHONES jack (MDS-JE770 only) after D/A
conversion. “ – DA” appears in the display
during this time.
To stop Input Monitor
Press x.
When recording from an FM or satellite
broadcast, the first few seconds of material are
often lost due to the time it takes you to
ascertain the contents and press the record
button. To prevent the loss of this material, the
Time Machine Recording feature constantly
stores the most recent audio data in a buffer
memory. This lets you record the sound from
6 seconds before starting recording, as shown in
the illustration below:
1
Do steps 1 to 5 of “Recording to an MD”
on page 11.
The deck changes to recording pause.
2
Start playing the program source.
3
Press AMS (or T.REC) at the point
where you want to start recording.
Recording starts with the six seconds of
prestored data in the buffer memory, then
continues recording via the buffer memory
thereafter.
The Music Synchro-recording allows you to
automatically synchronize recording to the MD
deck with the playing of the selected program
source. The Track Marking Function, however,
will differ according to the program source. For
details, see “Marking track numbers while
recording” on page 15.
1
Do steps 1 to 4 of “Recording to an MD”
on page 11.
2
Press MUSIC SYNC on the remote.
The deck changes to recording pause.
3
Start playing the program source.
Recording starts automatically.
Note
During Music Synchro-recording, Smart Space and
Auto Cut will operate regardless of their setting
(“S.Space On” or “S.Space Off”).
When the deck is connected to a Sony CD
player or Hi-Fi component system, you can
easily copy the contents of CDs to the MD
using the deck’s remote. Because the MD
remote operates both the MD deck and the CD
player or CD player section of the component
system, make sure to place the MD deck and the
CD player as close together as possible.
1
Turn on the amplifier and the CD player,
and select CD on the amplifier.
Starting recording with
6 seconds of prestored
audio data
— Time Machine Recording
When you press AMS
in step 3 End of the source
to be recorded
Time
6 seconds
Recorded
portion
Beginning of the source to
be recorded
Synchro-recording with
the audio component of
your choice
— Music Synchro-recording
Synchro-recording with a
Sony CD player
— CD Synchro-recording