Sony MDS-JE770 - Manual (Page 19)

Rec
o
rd
ing
to M
D
s
filename[\\WIN-48\NAKAYAMA 3-1\4233926121 3.14\423392612MDSJE770U2\GB05OPE-
U2.fm]
19
model name1[MDS-JE770] model name 2 [MDS-JE470]
[4-233-926-12(1)]
masterpage:Left
(3 column)
2
Do steps 2 to 4 of “Recording to an MD”
on page 11.
3
Insert a CD into the CD player and
select the playing mode (Shuffle Play,
Program Play, etc.) on the CD player.
4
Press CD-SYNCHRO STANDBY on the
remote.
The CD player changes to play standby and
the MD deck changes to recording standby.
5
Press CD-SYNCHRO START on the
remote.
The deck starts recording and the CD player
starts to play.
The track number and elapsed recording
time of the track appear in the display.
If the CD player does not start
playing
Some CD players may not respond when you
press CD-SYNCHRO START on the remote.
Press X on the CD player’s remote instead to
start play on the CD player.
Operations you may want to do
during CD Synchro-recording
Tips
• You can use the remote of the CD player during CD
Synchro-recording.
• During CD Synchro-recording, track numbers are
marked in the following ways:
— When the CD player is connected to the
DIGITAL IN connector, track numbers are
automatically marked as they appear on the CD.
— When the CD player is connected to the
ANALOG IN jacks, track numbers are
automatically marked when “T.Mark LSyn(c)”
has been selected (page 15).
— When you resume recording after recording
pause, a new track number is automatically
marked, regardless of the track marking
parameter setting (“T.Mark LSyn(c)” or “T.Mark
Off”).
• By reprograming the MD’s remote, you can use the
procedure above to perform synchro-recording with
a Sony video CD player.
Press number button 2 on the remote while pressing
down ?/1 on the remote. You can now operate the
MD deck and the video CD player with the remote.
To control the CD player again, press number button
1 on the remote while pressing down ?/1 on the
remote.
• When you make a CD Synchro-recording from a
Sony CD player connected with a CONTROL A1
ΙΙ
cable (not supplied) to the MD deck, the deck copies
CD text information as it is to the MD (Disc Memo
Copy Function) (MDS-JE770 only).
Notes
• When performing CD Synchro-recording with a CD
player with a mode selector, be sure to set the
selector to CD1.
• When you record tracks from certain CD or multi-
disc players, the entire material may be recorded as a
single track.
• The Disc Memo Copy Function may not operate for
extremely short CD tracks (MDS-JE770 only).
• Text information may not be copied for some CDs
(MDS-JE770 only).
Making a CD Synchro-
recording from a Sony CD
player connected with a
CONTROL A1
ΙΙ
cable (MDS-
JE770 only)
1
Do steps 1 to 3 of “Synchro-recording
with a Sony CD player” on page 18.
2
Set the CD player to playing pause
mode.
3
Press REC z on the deck.
The MD deck changes to recording pause.
4
Press H or X on the deck.
The deck starts recording and the CD player
starts to play. When CD play finishes,
recording stops.
To Press
Stop recording CD-SYNCHRO STOP on
the remote
Pause recording CD-SYNCHRO STANDBY
on the remote
Locate the next track to
be recorded during
recording pause (MDS-
JE470 only) CD PLAYER ./> on
the remote
Resume recording after
pausing CD-SYNCHRO START on
the remote
Check the remaining
recordable time on the
MD TIME (MDS-JE770) or
DISPLAY on the remote
(MDS-JE470) (page 17)
Press To change the
deck to And change the
CD player to
H Recording Play
x Recording pause Stop
X Recording pause Pause