Sony DPP--SV77 EN - Manual (Page 82)

82 GB
Additional information
Precautions
On safety
• Operate the printer on 120 V AC, 60
Hz (for the 110 to 120V area) or 220
to 240 V AC, 50/60 Hz (for the
models for other areas) only.
• Be careful not to set or drop any
heavy objects on the power cord, or
to damage the power cord in any
way. Never operate this printer with
a damaged power cord.
• Should any solid object or liquid fall
into the cabinet, unplug the printer
and have it checked by qualified
personnel before operating it any
further.
• Never disassemble the printer.
• To disconnect the power cord, pull it
out by the plug. Never pull the
power cord itself.
• When the printer is not going to be
used for an extended period of time,
disconnect the power cord from the
wall outlet.
• Do not handle the printer roughly.
• To reduce the risk of electrical shock,
always unplug the printer from the
electrical outlet before cleaning and
servicing the printer.
• Take care not to scratch or damage
your printer’s LCD screen. Always
use the supplied stylus or a plastic-
tipped pointer to tap on the screen.
Do not use a real pen, pencil, or
other sharp object on the screen.
• Your printer’s screen is made of
glass. Do not drop or submit your
printer to external shock.
On installation
• Avoid placing the printer in a
location subject to:
– vibration
– high humidity
– excessive dust
– direct sunlight
– extremely high or low
temperatures
• Do not use electrical equipment near
the printer. The printer will not work
properly in electromagnetic fields.
• The printer is designed to operate
horizontally. Never attempt to
operate the printer in a tilted
position.
• Do not place heavy objects on the
printer.
• Leave enough room around the
printer so that the ventilation holes
are not blocked. Blocking these holes
may cause internal heat build-up.
On moisture condensation
If the printer is brought directly from a
cold location to a warm location or
placed in an extremely warm or humid
room, moisture may condense inside the
unit. In such cases the printer will
probably not work properly and may
even develop a fault if you persist in
using it. If moisture condensation
occurs, turn off the power and do not
use the printer for at least one hour.