Sanyo PRO-200 - Manual (Page 94)

80 Section 2C: Controlling Your Phone’s Settings
SMS Voice Messages
Setting the Speakerphone
You can set the speakerphone on or off for SMS Voice
messaging. By default, the speakerphone is set to On.
1. Press > Settings > Messaging > VoiceSMS Options >
Speakerphone.
2. Select On or Off and press .
Setting the Sender’s Name
With this feature, you can identify yourself to people who
receive your SMS Voice messages.
1. Press > Settings > Messaging > VoiceSMS Options >
From Name.
2. Enter your name and press OK (left softkey).
Setting an Alert Notification
SMS Voice Messaging uses your phone’s data services. Your
phone can alert you that you are connecting to data services
each time you send an SMS Voice message.
1. Press > Settings > Messaging > VoiceSMS Options >
Connect. Alert.
2. Press Mark (right softkey) to alert you each time you
send an SMS Voice message.
3. Press Done (left softkey) to save the setting.