Adjusting the alertvolume settings, Alert notification – Sanyo PRO-200 User Manual
Page 82
68
Section 2C: Controlling Your Phone’s Settings
Adjusting the AlertVolume Settings
You can set the alert volume separately from the ringer
volume setting.
1.
Press
> Settings > Sounds > Volume> Advanced...
2.
Select Alarms, Text Message, Picture Mail, Voicemail,
VoiceSMS, Email, or Call Alerts.
3.
Using the navigation key, select Separate Vol.
Ⅲ
You can make the ringer vibrate at any volume level
by checking the box next to Always Vibrate.
4.
Press the navigation key left or right to choose a volume
level, and press Done (left softkey).
Alert Notification
Set your phone to alert you with an audible tone when you
change service areas, once a minute during a voice call, or
when a call has been connected.
1.
Press
>Settings > Sounds > Alerts.
2.
Select Beep Each Minute, Out ofService, Connect,
Signal Fade/Call Drop, Messaging, or Call Alerts and
press .
3.
Use your navigation key to select a setting and press
.