Sanyo PRO-200 - Manual (Page 138)

124 Section 2G: Using Contacts
To edit a Group entry:
You can change the group name or the image, or add new
member to the group.
1. Display a Contacts list and scroll to the group you want
to edit.
2. Press Options > Edit Group.
3. Change the group name or the image, or select Add More
to add a new member and press Start (left softkey).
Ⅲ
Use the key to check the box next to the member
and press Continue (left softkey) when you are done.
4. Press Save (left softkey) to save your changes.
Selecting a Ringer Type for a Personal Contact Entry
Assign a ringer type to a Contacts entry so you can identify the
caller by the ringer type. (See “Ringer Types”on page 64.)
1. From the Contacts list, select a Contacts entry to which
you would like to assign a ringer and press
.
2. Select the current ringer type and press to display the
Ringer menu.
3. Select Change.
4. Select an option and press .
5. Select a ringer and press .
Note You cannot add members to a Team DC group from your
phone.