Sony 4-133-499-11 (1) - Manual (Page 75)

Us
ing the shooting
function
75
Fn button t [AF area] t Select the desired setting
Notes
• The AF area may not be illuminated during continuous shooting or when the shutter
button is pressed all the way down without pause.
• The green frames that are displayed when the focus has been confirmed indicate the
area used for focusing. They do not indicate the size of the area. The AF area and the
frames may not be located on the same position. This is not a malfunction.
When it is difficult to get the proper focus in autofocus mode, you can
adjust the focus manually.
Selecting the focus area (AF area)
Select the desired AF are to suit the
shooting conditions or your preference.
The green frames are indicated at an area
where the focus has been confirmed.
• The area used for focusing is
illuminated briefly in viewfinder mode.
Area
(Wide) The camera determines which of the nine AF areas is used in
focusing within the AF area. If you press and hold the center
of the controller, you can adjust the focus using the spot AF
area.
(Spot) The camera uses the spot AF area exclusively.
(Local) Choose the area for which you want to activate the focus
from among nine areas with the controller during the
shooting. To select the spot AF area, press the center of the
controller.
Adjusting the focus manually (Manual focus)
AF area