Sony 4-133-499-11 (1) - Manual (Page 120)

120
Changing the functions of the button and
dial
The function of the AEL button can be selected from the following two
functions:
– Holding the locked exposure value by pressing the AEL button while
the button is held down ([AEL hold]).
– Holding the locked exposure value by pressing the AEL button until the
button is pressed again ([AEL toggle]).
MENU button t 1 t [AEL button] t Select the desired
setting
Notes
• While the exposure value is locked, appears on the LCD monitor and in the
viewfinder. Be careful not to reset the setting.
• The “Hold” and “Toggle” settings affect the manual shift (page 64) in the manual
mode.
When the recording mode is M (Manual exposure) or P (Program shift),
you can set the camera to that the adjustable item (the shutter speed or the
aperture value) can be selected using only the control dial.
It is convenient that you select commonly-used one when adjusting the
exposure.
MENU button t 1 t [Ctrl dial setup] t Select the desired
setting
Changing the function of the AEL button
Changing the function of the control dial