Siemens S45i - Manual (Page 88)

28.5.02 k45pe-ger.fm s45i - Eagle englisch, A31008-H4510-A1-1-7619
87
Fax/Data mode using a PC
§Menu§
f
Setup
f
Connectivity
f
Fax/data mod.
With the phone connected to a PC,
you can transmit and receive faxes
(class 2) and data. Appropriate soft-
ware for data communication/fax
communication must be available on
your PC and there must be a con-
nection (e.g. IrDA, page 81) to the
phone.
Fax and data services must be ena-
bled by the service provider.
Different networks support different
types of fax/data reception, contact
your service provider for details.
Fax/data mod.
Your service provider must give you
a number for telephoning and a fax/
data number.
Sending
Start your PC communication pro-
gram and enter the required destina-
tion phone number in the program.
Receiving
The call is signalled by a special ring-
er and the type (fax or data) is dis-
played.
Now start the communication pro-
gram in your PC to receive the fax/
the data.
~
Speech/fax
Send
§Menu§
f
Setup
f
Connectivity
f
Fax/data mod.
f
Send vce/fax
Set this function on the phone
before transmission so that you can
switch from voice mode to fax
mode.
While the connection is being set
up, the following soft key is available
for two seconds:
§Voice/fx§ Switch to Send vce/fax
mode; you may now
send a fax.
Receive
(Only if a special fax or data number
is not available).
Start the required communication
program on your PC and switch on
the function at the phone during the
call (the PC accepts the connection).
§Menu§
f
Setup
f
Connectivity
f
Fax/data mod.
f
Voice/fax rec
End transmission
End transmission in the PC software
and/or press
S
.