Audio, Ringer setting, Volume – Siemens S45i User Manual
Page 72: Silent alert, Call screening, Information tones, Key tones
28.5.02
k45pe-ger.fm
s45i - Eagle englisch, A31008-H4510-A1-1-7619
71
Audio
You can set the tones that sound in
specific situations to suit your
particular tastes.
§Menu§
f
Audio
f
then select a function:
Ringer setting
Activate, deactivate the ringer or re-
duce it to a short beep and confirm
this as the basic setting.
)
Beep is activate.
&
Ringer is deactivated.
Volume
B
Select the range:
All calls
d Calls
VIP calls
Alarm
Messages
Cell broadcast
B
Set volume.
§OK§
Confirm.
In standby mode: Activate and deactivate
the ringer for the current session:
*
Hold down.
Once the phone has been switched off and
on again and following use with the headset
or car kit, the basic setting becomes active
again.
Displays rising volume.
If two separate phone numbers are regis-
tered for your phone, you can set different
volumes for the
Silent alert
To avoid being disturbed by the ring-
er, you can activate the trembler in-
stead. It can also be active in addi-
tion to the ringer (e.g. in noisy
environments). The trembler is de-
activated when the battery is being
recharged.
Call screening
Only calls from numbers that are in
the Phonebook/Addressbook are
signalled audibly or by the trembler.
Other calls are merely displayed.
If you do not accept these calls, they
are diverted to your mailbox (if set,
page 51).
(
Displayed when
activated.
Information tones
Activate/deactivate all service tones
and alarm tones or use
Extended
to
activate/deactivate tones.
Key tones
Set the acoustic key tone:
Click
or
Tone
or
Silent
~