Siemens S45i - Manual (Page 44)

28.5.02 k45pe-ger.fm s45i - Eagle englisch, A31008-H4510-A1-1-7619
43
WAP
Setup
Preparation of the phone for Internet
access depends on the service pro-
vider currently used:
• If the settings have already been
made by the service provider you
may begin immediately.
• If access profiles have already
been assigned by the service pro-
vider, select a profile and activate
it (page 43).
• The access profile must be set
and activated manually (page 43).
If necessary, check with your service
provider for details.
Profiles
You can set or change up to 5 access
profiles (may be barred by the serv-
ice provider). The entries and func-
tions may vary depending on your
service provider. You can change a
profile each time before you access
the Internet (page 44).
Profile settings
To create a new profile proceed as
follows:
§Menu§
f
Surf & fun
f
Internet
f
Profiles
V
Select the profile to be
changed.
§Edit§ The entry card is dis-
played.
V
Make your entries field
by field.
You may get further information
on the entries from your service
provider.
GPRS and CSD data see page 81.
§Save§ The settings are stored
and the profile list is
shown.
Profile name Name the profile or rename a
default name.
WAP
parameters
IP address:
Enter IP address.
Port:
Enter port number.
Homepage:
Enter homepage if not set by
the service provider.
Linger time:
Enter time in seconds after
which a connection should
be terminated if no input or
data transfer takes place.
Special characters
(as in the SMS text editor)
*
Press 3 x for /
#
Press 3 x for @
0
Press for . (full stop)
0
Press repeatedly for :
*
Press repeatedly for ~