Siemens S45i - Manual (Page 78)

28.5.02 k45pe-ger.fm s45i - Eagle englisch, A31008-H4510-A1-1-7619
77
Setup
§Menu§
f
Setup
f
Security
f
select a function:
Only ,
(PIN 2 protected)
The dialling options are restricted to
SIM protected phone numbers. If
only area codes are entered, the rel-
evant phone numbers can be added
to these manually before dialling.
Last 10 only
(phone code protected)
Calls are limited to the call list of di-
alled numbers (page 49). This list
can be filled with phone numbers
specifically for this purpose:
Delete the call list and create "new
entries" by dialling phone numbers
and cancelling before the connec-
tion is established.
This SIM only
(phone code protected)
Your phone is prevented from oper-
ating with a different SIM card.
~
Network
§Menu§
f
Setup
f
Network
f
select a function:
Line
This function is only displayed if it is
supported by the service provider.
Two independent phone numbers
must be registered on the phone.
Select
Select the phone number to be
used.
If you change frequently, it is more
convenient to make the selection us-
ing soft key (page 69).
=
Display the active phone
number.
Block line
(phone code protected)
You may limit usage to one phone
number.
Special settings can be made for each
phone number (e.g. melody, call divert etc).
Switch to the required phone number first.
To switch the phone number/line (in stand-
by mode).
0
Press, then:
§Line 1§ Press.
~