Protocol, Miscellaneous, Miscellaneous 45 – SysKonnect Wireless LAN Cardbus Adapter SK-54C1 User Manual
Page 45: Figure 46: advanced – protocol section, Figure 47: advanced – miscellaneous section
SysKonnect SK-54C1 Wireless LAN Cardbus Adapter
Advanced Tab
45
Protocol
This section of the Advanced tab sets the “Protocol” options.
Figure 46. Advanced – Protocol Section
•
“Power Save Mode” – sets the power mode:
•
C
ONTINUOUS
A
CCESS
•
M
AX
P
OWER
S
AVE
•
“Preamble (802.11b)” – sets the radio preamble (takes effect only when attaching to
802.11b networks):
•
A
UTO
•
L
ONG
•
“Transmit Antenna” – transmit antenna mode is set to A
NTENNA
2
•
“Receive Antenna” – sets the receive antenna mode:
•
D
IVERSITY
O
N
•
D
IVERSITY
O
FF
•
“Transmit Rate” – the range of the data rate depends on the type of access point that the
SysKonnect Cardbus Adapter is connected to. The default setting is A
UTO
.
•
“Fragment Threshold” – sets the fragmentation threshold (i.e., the size that packets are
fragmented into for transmission). The default setting is 2346.
•
“RTS/CTS Threshold” – sets the packet size at which the access point issues an RTS (or
CTS) frame before sending the packet. The default setting is 2346.
The A
PPLY
C
HANGES
button configures the options according to the changes entered, where-
as the D
EFAULT
button applies the default values.
Miscellaneous
This section provides further protocol options.
Figure 47. Advanced – Miscellaneous Section
•
Auto connect if link loss or no connection (Use checked profiles in
Disabling this checkbox disables the auto-configuration feature. Whenever there is a link