Protocol, Figure 37: protocol tab – SysKonnect Wireless LAN Cardbus Adapter SK-54C1 User Manual
Page 38
38
3 Marvell Configuration Utility
Figure 36. WPA Radius Configuration for WPA 802.1 PEAP
5.
Enter all required information (Login Name, Password, Domain).
Protocol
On the P
ROTOCOL
tab the user can set or change protocol information related to the network
connection.
Figure 37. Protocol Tab
The tab provides the following options:
•
Do not change settings – If this checkbox is activated, the protocol settings are not
changed when the profile is applied.
•
“Use below settings” – If the Do not change settings checkbox is deactivated, some of
the protocol settings below can be changed:
•
“Power Save Mode” – Sets the power mode. Available options are C
ONTINUOUS
A
CCESS
and M
AX
P
OWER
S
AVE
. The default is C
ONTINUOUS
A
CCESS
.
•
“Preamble (802.11b)” – Sets the radio preamble to A
UTO
or L
ONG
. This option takes
effect only when attaching to an 802.11b network.
•
“Transmit Rate” – The range of the data rate depends on the type of access point
that the SysKonnect Cardbus Adapter is connected to. The default setting is A
UTO
.