SysKonnect Wireless LAN Cardbus Adapter SK-54C1 - Manual (Page 15)

SysKonnect SK-54C1 Wireless LAN Cardbus Adapter
2 Driver Installation
This chapter explains how to install the SysKonnect Windows drivers on a Windows based
(XP or 2000) PC computer.
The Windows XP or Windows 2000 adapter driver provides the interface between the
SysKonnect Cardbus Adapter and the computer.
The following topics are covered:
• Installing the Windows XP Driver
• Installing the Windows 2000 Driver
Installing the Windows XP Driver
To install the Windows XP driver, proceed as follows:
1. After you have installed the adapter in your computer, boot Windows XP.
Windows detects the SysKonnect Cardbus Adapter during the boot operation automati-
cally. If the computer does not find the new hardware, go to chapter 6 “Troubleshooting”
on page 55.
The window “Found New Hardware Wizard” is displayed.
Figure 1. Windows XP – Found New Hardware Wizard
i
There are two folders on the installation CD-ROM corresponding to the drivers for the two dif-
ferent Windows operating systems:
root\ ... \WinXP
root\ ... \Win2K
When prompted for the driver for your system, select the appropriate folder.