Figure 32: wpa radius configuration, Figure 33: select certificate – SysKonnect Wireless LAN Cardbus Adapter SK-54C1 User Manual
Page 36
36
3 Marvell Configuration Utility
To use WPA 802.1x EAP/TLS, proceed as follows:
1.
In the field “Authentication Mode”, select 802.1
X
.
2.
In the field “Encryption Method”, select TKIP or WEP.
3.
From the pulldown menu under “802.1x Authentication Protocol” select EAP/TLS (U
SE
C
ERTIFICATE
).
4.
Click the C
ONFIGURE
WPA R
ADIUS
button to configure the security settings for WPA EAP/
TLS.
The window “WPA EAP/TLS Radius Configuration” is displayed.
Figure 32. WPA Radius Configuration
5.
Click the B
ROWSE
button.
The window “Select Certificate” is displayed.
Figure 33. Select Certificate
6.
Select the desired certificate.
7.
Click S
ELECT
.
The window “WPA Radius Configuration” is displayed again and the name of the selected
certificate appears in the field “Certificate”.