Siemens TFT - Manual (Page 85)

Housings and Mounts
Housing Mounts
3-11 © Siemens Building Technologies Group
3
Type Order No.
BA01C BA01C Corner Mount Adaptor
A corner mount adaptor which allows the standard fixed brackets to be
mounted on the corner of buildings. The design of the adaptor spreads
the load over a large area. A typical brackets which can be mounted to
this adaptor is e.g. the BP40. The unobtrusive and simple design allows
the simple and effective installation of CCTV equipment on the corner
of buildings. Corner mounting allows an excellent viewpoint to be
achieved from a CCTV installation.
Colour Polyester powdercoat RAL7032
leatherette full gloss
Dimensions (Ø x H)
Load rating 75 kg
Finish 10 SWG mild steel
Weight 1.70 kg
BPZ:80-100
BHC02 BHC02 Ceiling Mount Bracket for HS02
A ceiling mount bracket casting which can be used with the HS02B and
HS02B/L camera housing. The casting replaces the standard casting and
is bought as an after market add-on. The bracket is suitable for indoor
and outdoor use.
Colour Painted polyester powdercoat
RAL7032 leatherette full gloss
Finish Cast aluminium
Weight 0.60 kg
BPZ:80-107