Siemens TFT - Manual (Page 105)

Pan/Tilt and Telemetry Equipment
Accessories Pan/Tilt and Telemetry Equipment
4-15 © Siemens Building Technologies Group
4
Type Order No.
RX2-PCBD D-Type Module
Plug-in module for the RX2 series telemetry receivers to allow D-type
telemetry to be used. D-type is the "twisted pair" type. The RX2 series
receivers will require either the D-type or the D-type module to operate.
Weight 0.20 kg
BPZ:80-213
RX2-PCBC C-Type Module
Plug-in module for the RX2 series telemetry receivers to allow C-type
telemetry to be used. C-type is the "over the coax" type. The RX2 series
receivers will require either the C-type or the D-type module to operate.
Weight 0.20 kg
BPZ:80-212
RX2-PCB234 3-Wire Lens Adaptor
Plug-in module for the RX2 series telemetry receivers which allows the
wiring in of 3 wire lenses.
Lenses and lens drive units are available in a multitude of configura-
tions and styles. This adaptor simply allows 3-wire-drive lenses to be
controlled from the RX2 Series telemetry receivers.
Weight 0.024 kg
BPZ:80-211
P16CA-AC7F Spare AC Power Supply Cable Including Connector for Pan-Tilt P25
A spare power supply cable including connector for pan-tilts with 7
female pins (AC version).
Weight 0.24 kg
BPZ:80-173
P12C-DC6 Spare DC Connector for Pan-Tilt P25
A spare connector for pan-tilts with 7 female pins (DC power supply
connector).
Weight 0.40 kg
BPZ:80-170