Siemens TFT User Manual

Page 117

Explosion-Proof Housings and Mounts

Explosion-Proof Pan/Tilt Units

6-7

Type

Order No.

FPHC..

Phoenix Explosion-Proof Aluminium Camera Housing and PTZ Head
Assemblies ATEX Certified for IIC Applications

The "Phoenix Explosion-Proof" equipment is ATEX-certified to be used
in potentially hazardous areas where there is a risk of explosion
because flammable gases‚ vapours‚ mists or dusts may be present. The
camera head‚ which comprises both a housing and pre-set pan-tilt head‚
is designed to prevent explosion by containing any heat‚ sparks‚ or
flames generated by equipment inside it. This prevents ignition of
potentially explosive atmospheres or materials outside the equipment.
The camera head is ATEX-certified for use in IIC gas environments
(includes hydrogen and acetylene). The housing is supplied complete
with heater & sun shield. The housing can have a wiper and integral 10
or 17fn AC Telemetry Receiver factory fitted.

Siemens will deliver this housing and PTZ head only as a factory pre-
built version with Siemens or customer-supplied camera and lens.
Therefore one of the Phoenix-FIT options must be ordered.
Please note‚ that Siemens cannot supply ATEX IIC Equipment certifi-
cates unless one of the Phoenix-CERT option is ordered with each
housing.
Glands are supplied for both ends of P&T lead. Suitable ATEX approved
cable glands for all other cables must be purchased separately.

Dimensions (W x H x D)

Housing: 209 x 186 x 675 mm
P&T: 167 x 291 x 471 mm

Colour

Body: Polyester Powder Coat
RAL1021(Yellow).
Endplates: Clear Anodised.
Sunshield: White Polyester Powder
Coat.

Cable entry

Internal Terminal Block‚ 4 off 20 mm
x 1.5 threaded holes for certified
glands‚ fitted with BASEEFA certi-
fied blanking plugs.

Pan speed

4.5°/sec
Torque 45 Nm
Backlash ±0.15° (max.)

Tilt speed

e.5°/sec
Torque 45 Nm
Backlash ±0.15° (max.)

Rotation

Pan 252° (max.)
Tilt ±172°

Finish

Aluminium extrusion (housing
body)‚ aluminium (P&T body‚ all end
caps and housing sunshield)

Load rating

40 kg

Presets

Standard

Protection rating

IP67 BS EN 60 529

Weight

Housing: 11.8 kg
P&T: 19.0 kg

FPHC..

FPHC-40

Phoenix 230 V AC ATEX IIC Explosion-Proof Preset Camera Head

As FPHC.. for technical details‚ but with the following differences:

Power requirements

230 V AC

Power consumption

51 VA

S24245-C4070-A1

This manual is related to the following products: