Siemens TFT - Manual (Page 125)

Video Transmission
Twisted Pair/Coax
7-3 © Siemens Building Technologies Group
7
Type Order No.
TP-TXMOD02 Twisted Pair Video Transmitter Module 2 Channel
Twisted pair transmitter module for 2 video signals‚ suitable for mount-
ing in TP-CH 19 chassis. Connects to TP-RXMOD02 receiver.
Range < 1200 m with wire diameter 0.8
mm‚ PE-insulated with pre-empha-
sis switched on‚ with receiver mod-
ule TP-RXMOD02
Signal/noise ratio > 60 dB at 0 dB equalization‚ with
weighting
Video input (composite) 1 Vpp‚ 75 Ohm‚ asymmetric
Video output (two-wire) 2‚ 2.4‚ 2.8‚ 3.2 Vpp into 124 Ohm‚
symmetric
Dimensions (W x H x D) 100 x 30 x 160 mm
Weight 0.12 kg
Power supply From chassis TP-CH
2GF5604-8BA
TP-RXMOD02 Twisted Pair Video Receiver Module 2 Channel
Video receiver module for 2 twisted pair video signals‚ suitable for
mounting in TP-CH 19 chassis. Connects to TP-TXMOD02 or CTTT0111
transmitter.
Range < 1200 m with wire diameter 0.8
mm‚ PE-insulated with pre-empha-
sis switched on in the transmitter
module TP-TXMOD02
Signal/noise ratio > 60 dB at 0 dB equalization‚ with
weighting
Dimensions (W x H x D) 100 x 30 x 160 mm
Weight 0.15 kg
Power supply From chassis TP-CH
2GF5604-8BB
TP-CH Twisted Pair 19" 3U Chass for 10 Modules PSU
Use of the 19" chassis is recommended when using the transmission
system indoors or if several modules are located at one point. A maxi-
mum of 10 modules and the included ±5 VDC power supply unit can be
fitted. Each module is provided with the associated front panel‚ and
two guide rails are used in the chassis for each module.
Video inputs Asymmetric: SMB plug‚ Symmetric:
terminal strip
Video outputs Asymmetric: SMB plug‚ Symmetric:
terminal strip
Dimensions (W x H x D) 482 x 133 x 250 mm
Weight 4.20 kg
Power requirements 90 to 240 V AC
Power consumption 40 W
2GF5608-8BA