Sunfire III - Manual (Page 39)

User's Manual
39
CHAPTER 4
MAIN MENU
TRIMS
MODES
TONE
INPUTS
SETTINGS SETTINGS
MAIN ZONE
ZONE 2
SPEAKERS
VIDEO
SOFTWARE
CONTROL
Speaker Position
This menu allows you to enter the
distance in feet from your listening
position to the various speakers.
The TGIII will then automatically
adjust and correct the speaker delay
times. The sound from each speaker
should arrive at the listener at the cor-
rect time. The distance measurement
is not critical, and a visual estimate is
usually adequate.
The procedure is as follows:
1. Measure or visually estimate
(in feet) how far each speaker
is away from the center listen-
ing position of your home
theater.
2. In the OSD menu, use the
remote control joystick arrow
buttons to enter the distance in
feet for each speaker.
3. The TGIII automatically sets
the appropriate delays for each
speaker so the sounds arrive
at the listening position at the
correct time.
4. Use this table to record your
speaker distance measure-
ments.
SPEAKER DISTANCE
MAIN
CENTER
SURROUND
SURROUND BACK
SPEAKERS
SIZE
POSITION
CALIBRATION
CROSSOVER 110 HZ
SUBWFR MODE
Speaker Position Menu
SPEAKER POSITION
MAIN/SIDE AXIS 10 FT
CENTER 11 FT
SURROUND 5 FT
SURROUND BACK 4 FT