Sunfire III - Manual (Page 30)

User's Manual
30
CHAPTER 4
On Screen Display (OSD)
Video Connections
The On Screen Display (OSD) is
present at the composite video
or S-video MAIN outputs. It is
also present at the output labeled
VID2/MON2, but only if it is set to
MON2. Make sure that your TV
monitor's video input is connected
correctly to one of these outputs.
Note: The component video
signal path uses broadcast-quality
components with no OSD in the
path. This assures no possiblity of
coloration of the video signal.
OSD Activation
The OSD is activated using the
remote's MENU button (with the
remote set to operate the TGIII).
The joystick pad and surround-
ing buttons allow you to navigate
through the OSD menus to control
and customize many features of
the TGIII.
Press EXIT to quit the OSD at any
time. Any changes you make will
be saved.
Note that the TGIII front panel dis-
play shows abbreviated text when
the OSD is activated.
C r
Y
b
DVD DVD
CD
SAT VID1 CD
MAIN VCR VID2/MON2
MAIN VCR VID2/MON2
MAIN VCR VID2/MON2
DVD SAT VID1 MAIN MON2
COMPONENT OU AUDIO/VIDEO OUTPUTS COMPONENT VIDEO IN
DIGITAL AUDIO INPUTS
C
MAIN MON2 No OSD from:
• Component video outputs
• VCR outputs
• VID2/MON2 set to VID2
GUIDE MENU
MODE MODE
EXIT INFO
Quick Information
Pressing INFO at any time will
bring up a short description of the
source you are listening to. For
example if you are listening to a
DVD, the TV display might show:
DVD DIGITAL 48K
DOLBY EX 5.1 / 5.1
where:
DVD is the selected input,
DIGITAL is the signal type,
48K is the sample rate,
DOLBY EX is the mode,
5.1 is the input format,
5.1 is the output (i.e. fi ve
speakers and a subwoofer).