Sunwave Tech. SRC-3310/9320 User Manual

Page 51

Problem

Solution

A button of your

existing remote

performs two or
more functions

Some remotes issue multiple commands

when a button is held down. Please be

sure to teach different buttons of SRC-93
SERIES for these different commands.

Each button of SRC-93 SERIES can only

learn one command.

The LCD screen
turns off.

The SRC-93 SERIES is preset automatically
to switch the LCD off after the Power

Down time. Just tap the LCD screen or

any button to turn the SRC-93 SERIES
back on again. You can also reset the

Power Down time period. (page 41)

IR LEARNING

cannot be made

successfully.

Replace batteries in the SRC-93 SERIES

and the remote you are trying to learn

from.
Keep distance between remotes to

about 2~4 inches.
Do not learn near an incandescent
lamp.
Memory capacity is full (56 keys for each
of 16 models).
The learning process has no errors, but

you still can’t control your AV devices:
repeat the learning procedure again. If

you still can’t solve the problem, use the

code collection feature and email
codes to Sunwave. (page 24)

Original remote might not be

compatible with learning procedure.