Sunwave Tech. SRC-3310/9320 - Manual (Page 21)

17
configure all buttons on the SRC-93 SERIES for use with a
specific manufacture model number. This feature is the fastest
way to program the SRC-93 SERIES but requires that your
device be located in Preprogrammed Code Table as the
separate page with this manual. (Some newer or less-common
devices may not be pre-programmed and must be learned
using the Learning Function.)
• Using the Learning Function: Use this method to directly learn
the proper infrared signals from another remote control. The
learning eye of the SRC-93 SERIES will learn the proper signals to
send. This method is perfect for newer or less common devices
or if a certain button still not does perform the desired function
after using pre-programmed manufacturer codes; however,
not 100% of codes can be learned and it may be necessary to
collect unrecognized codes and send them to SUNWAVE. (See
page 24 for more information on unrecognized code
collection.)
Using Manufacturer Codes
The SRC-93 SERIES is pre-programmed with many
manufacturers' codes to operate a wide range of TVs,
VCRs, DVDs etc… These are useful if you have lost the
original remote. However, because of the great variety
and number of remotes on the market, not all functions
may work when using the pre-programmed codes. If you
have the original remote, it is recommended you teach
the SRC-93 SERIES the functions most important to you.
(See Using the Learning Function on page 20.)
Some codes are designed to operate more than one
model. It may take several tries to find the code that
works with your unit.
To program a manufacturer’s code for a device, follow
these steps: