Sunwave Tech. SRC-3310/9320 - Manual (Page 34)

SRC-93 SERIES User’s Manual
30
Set up the macro using the following steps:
Press and hold for two seconds the
MACRO button on the Touch Screen.
Press each number button (2, 4, 6, 8)
until it disappears.
Use the arrow buttons on the Touch
Screen to select KEY and then press
the OK button.
1. Select a device using the device
buttons on the SRC-93 SERIES.
(ex. Press TV button)
2. On the Touch Screen select one
of the buttons to assign the
macro to. You will hear two
beeps.
Note: If you select a key that already
has a macro assigned to it you will
replace the old macro.
Note: You cannot assign a
macro to the Quick channels.
Define Macro
3.
Press the TV device button.
4. Press the POWER button.
5. Press the TV/Video button.