Sunwave Tech. SRC-3310/9320 - Manual (Page 18)

SRC-93 SERIES User’s Manual
14
1. Press the device key you wish to
use for this device. For example, if
this is a new TV you should press
the TV button. For a new DVD
player, press the DVD button.
2. Give your new Device a label.
Use the UP and DOWN arrows to
change the letter. Use the LEFT
and RIGHT arrows to change the
position. (Labels can be four digits
long.)
Press the OK button.
3. Select one device attribute to
load the default device screen.
Use the UP and DOWN arrows to
choose.
4. Press the OK button to confirm.
Modifying an Existing Device
If you want to modify an existing device that is already
setup in the SRC-93 SERIES, no additional preparation is
required and you may proceed directly to the Touch
Screen layout changing section on page 15.
Re-Labeling Devices
You may want to re-label an old device and you can
do this using the LABL selection in the SETUP Menu: