Spectra Logic 10000 - Manual (Page 62)

Chapter 5. Operating the Library
62
this feature). When this period expires, the library displays the Queued Unload message
on the main screen (Figure 5-1).
The backup software specifies which tapes are to be moved out of the library.
Note: Performing any export media function via the backup software will
place the piece of media in a queued unload status when this
option is enabled on the library.
Enabling Queued Unloads To use queued unloads, your backup software must support
this feature, and you must enable the Queued Unloads setting.
To enable queued unloads:
1. From the main screen, touch Config > More. The second Configuration screen
displays.
2. On the second Configuration screen, touch the + symbol beside the Queued
Unloads button. Queued unloads are enabled.
3. Touch Save Parms > No, because it is not necessary to restart the library for these
changes to take effect.
Using Queued Unloads If you have enabled the queued unloads settings in the library
and in your backup software, the Queued Unloads button will appear when tapes are
ready to be moved out of the library.
Figure 5-1 The Queued Unload message.