Sharp LC-32DV22U - Manual (Page 51)

49
Parental control setting
Some discs are specified as not suitable for children.
Playback of such discs can be restricted with this
TV/DVD.
Press SETUP and the SETUP screen
displays.
Press ϳ/ϴ to select (SETUP), then
press ϵ/϶ or ENTER.
Press ϳ/ϴ to select “Parental”, then press ϶
or ENTER.
“Enter Password” screen will appear.
Press “0000” using Number buttons (0–9).
(Please note, this is pre-setting password of
this unit). Then press ENTER. The parental
level list will appear.
• If you input a wrong number, press CANCEL.
1
2
3
4
Selected item Description
Level Off The parental control setting does not
function.
Level 8 Virtually all DVD software can be played
back.
Level 1 DVD software for adults cannot be
played back.
6
• Select from level 1 to level 8. The limitation will be more
severe as the level number decreases.
5 Press ϳ/ϴ to select from the level 1 to level
8. The limitation will be more severe as the
level number is lower. Then press ENTER.
Press SETUP to return to the normal screen.
NOTE
After the rating is locked, the setting cannot be
changed unless you enter the correct password.
NOTE
• The password is required every time when you change
the parental level.
• Depending on the discs, the TV/DVD may not be able to
limit playback.
• Some discs may not be encoded with specific rating level
information though its disc jacket says “adult.” For those
discs, the parental control feature will not work.
Set the new password
Press SETUP and the SETUP screen
displays.
Press ϳ/ϴ to select (SETUP), then press
ϵ/϶ or ENTER.
Press ϳ/ϴ to select “Password”, then press
϶ or ENTER.
“Enter Current Password” screen will
appear.
Press Number buttons (0-9) to enter the
password you have stored.
• If you input a wrong number, press CANCEL.
Parental : Off
Password : Change
Then press ENTER. “Enter New Password”
screen will appear. Press Number buttons
(0–9) to input the new password.
Press ENTER. Now your new password has
been set. Be sure to remember this number!
1
2
3
4
5
6
Function setup
NOTE
If you forget the password...
1. Press EJECT to remove the disc.
2. While holding 7 down on the remote control and at the
same time press STOP on the front panel. “Password
Clear” appears on the screen. Now the password has
been returned to the initial value (“0000”).