Sennheiser EK 2000 - Manual (Page 20)

19
Adjusting settings via the operating menu
Canceling an entry
To subsequently return to the last edited menu item:
Exiting a menu item
To return to the next higher menu level:
To directly return to the current standard display:
Adjusting settings via the operating
menu
The main menu “ Menu ”
Synchronizing a transmitter with the diversity receiver – “Sync”
You can synchronize a suitable transmitter of the 2000 series with the
receiver. By default, the following parameters are transferred to the trans-
mitter during synchronization:
̈
Press the ON / OFF button to cancel the entry.
The current standard display appears on the display panel.
̈
Press the SET button repeatedly until the last edited menu
item appears.
̈
Change to the “ Exit ” menu item.
̈
Confirm your selection.
̈
Press the ON / OFF button.
Setting Transferred parameters
“ Frequency Preset ” Current receiving frequency (see page 23)
“ Name ” Current name set for the receiver (see page 23)
“ Pilot Tone ” Current pilot tone setting of the receiver
(“
Inactive ”/“ Active ”, see page 27)
ON/OFF
SET
Menu
Exit
SET
ON/OFF