JVC DR-MH50S - Manual (Page 78)

78
EN
SUBSIDIARY SETTINGS
Some DVD-RAM/RW discs are unformatted.
Format the disc when you use an unformatted disc or you want to
delete all recordings and data on the disc.
Format A DVD-RAM Disc
1
Press SET UP to access the Main Menu screen.
2
Press selection keys to select AHDD/DVD SET UPB, then
press G.
3
Press selection keys
to select
ADISC SET
UP B, then press G.
4
Press selection keys
to select
AFORMATB,
then press ENTER.
Press selection keys
to select
AOKB, then
press ENTER.
5
Press selection keys
to select
AEXECUTEB,
then press ENTER.
Format A DVD-RW Disc
1
Perform steps 1 to 3 of AFormat A DVD-RAM DiscB as above
before continuing.
2
Press selection keys to select AFORMATB, then press ENTER.
Press selection keys to choose AVR MODEB or AVIDEO
MODE B, then press ENTER when ADISC WILL BE
FORMATTED B appears on the TV screen.
AVR MODEB:
To be chosen when you want to record, erase, or edit data on
the disc repeatedly.
AVIDEO MODEB:
To be chosen when you want to erase all the data on the disc
once played back to record new data, or play back the disc on
other DVD players.
3
Press selection keys to select AEXECUTEB, then press
ENTER.
NOTES:
● It is impossible to format Version 1.0 DVD-RW discs in Video
mode.
● It is impossible to format DVD-R discs.
● All the titles on a disc will be deleted once the disc is formatted
even if they are protected titles. (
A pg. 52)
Format A Disc (DVD Deck Only)
ATTENTION:
● When a disc is formatted, all recordings and data are erased. It
is impossible to restore them.
● Never turn off the unit or disconnect the mains power cord
while
ANOW FORMATTING...B is displayed on the TV screen.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
● Load a DVD-RAM/RW disc to format.
ENTER
SET UP
FGDE
CABLE/SAT
DVD TV
Selection Keys
Video
Video
FINALISE CANC. FINALIS.
HDD SET UP DVD SET UP DISC SET UP
FORMAT
SELECT WITH @ THEN PRESS [ENTER] ENTER
SELECT
SET UP
EXIT
PRESS [SET UP] TO EXIT
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP INITIAL SET UP