JVC GD-V501PCE - Manual (Page 28)

28
Screensaver
(For preventing after-images)
Do not display a still picture, especially in 4:3 mode, for any length of time.
If the display must remain on, a Screensaver should be used.
2
3
1
4
Press to display the Setup menu screen.
SET UP
Press to select the Screensaver.
Press to select the Screensaver screen.
Press to select the Function.
Press to select the desired function.
Press to select the Mode.
Press to select each mode items.
Mode selection
Reversal / Scroll selection
White bar scroll : The white bar will scroll from left to right.
Image Reversal : Negative image will be displayed on the screen.
Set up TIMER
Setup
Signal
Screensaver
Component/RGB-in select
RGB
OSD Language English (UK)
Screensaver
Function
Mode White bar scroll
Time Designation
Start Time 0:00
0:00
SP Adjustment Mid
Finish Time
Screensaver
Function
Mode White bar scroll
Interval
Periodic Time 0:00
0:00
SP Adjustment High
Operating Time
Screensaver
Function
Mode White bar scroll
Time Designation
Start Time 0:00
0:00
SP Adjustment Mid
Finish Time
Time Designation : Operates when Start Time and Finish Time are setup and those
times arrive.
After selecting Time Designation or Interval, the relevant Time Setup will become available for selection and the
Operating Time may be set. (Time cannot be set when “Mode” is “on” or “off.”)
Interval : Operates when Periodic Time and Operating Time are setup and those
times arrive.
Screensaver
Function
Mode White bar scroll
Interval
Periodic Time 0:00
0:00
SP Adjustment High
Operating Time
Off
White bar scroll Image Reversal
On : Operates when the (ACTION) is pressed.
If the Mode is at On, the menu screen will disappear and the
Screensaver will be activated.
To stop the Screensaver under On, press the
R
button.
Screensaver
Function
Mode White bar scroll
off
Start Time 0:00
0:00
SP Adjustment High
Finish Time