JVC RX-6030VBK - Manual (Page 74)

28
English From the remote control
DVD MULTI
1
Press DVD MULTI.
Note:
When you select “DVD MULTI” as the source to play, Surround/
DSP mode is canceled, and SURROUND and DSP buttons do
not work.
2
Select the analog discrete output mode on
the DVD player, and start playing a DVD.
• Refer also to the manual supplied with the DVD player.
If you want to adjust the sound, see pages 19 to 21.
Once you have made adjustments, the receiver retains the
adjustments until you change them.
This section is ONLY for RX-6030VBK and RX-6032VSL .
This receiver provides the DVD MULTI playback mode for
reproducing the analog discrete output mode of the DVD
player. Before playing a DVD, refer also to the manual supplied
with the DVD player.
Activating DVD MULTI Playback Mode
To use DVD MULTI playback mode, connect the DVD
player to the analog discrete input jacks on the rear of the
receiver (see page 9) and set the DVD player to the analog
discrete output mode.
On the front panel
DVD MULTI
1
Press DVD MULTI.
Note:
When you select “DVD MULTI” as the source to play, Surround/
DSP mode is canceled, and SURROUND and DSP buttons do
not work.
2
Select the analog discrete output mode on
the DVD player, and start playing a DVD.
• Refer also to the manual supplied with the DVD player.
If you want to adjust the sound, see pages 19 to 21.
Once you have made adjustments, the receiver retains the
adjustments until you change them.
Using DVD MULTI Playback Mode
STANDBY
STANDBY/ON
PHONES D I G I T A L P R O L O G I C
D I G I T A L
S U R R O U N D
SURROUND
DSP
SPEAKERS
ON/OFF
SUBWOOFER OUT FM MODE MEMORY
ON/OFF
FM/AM TUNING
DVD VCR CD FM AM TAPE/CDR TV SOUND
SURROUND/DSP OFF
DIMMER
INPUT DIGITAL
RX–6030V AUDIO/VIDEO CONTROL RECEIVER
INPUT ANALOG
INPUT ATT
FM/AM RESET
SOURCE NAME
RX-6030V
RX-6032V
ONLY
1
4
7/P
10
2
5
8
0
3
6
9
10
TA/NEWS/INFO
DISPLAY MODE
A/V CONTROL
RECEIVER
EN28-40_RX-60_5030[C]f 02.12.24, 18:41 28