Basic operations, English, Press tape/cdr (source name) on the front panel – JVC RX-6030VBK User Manual
Page 58: Selecting different sources for picture and sound
12
English
Basic Operations
DIGITAL AUTO
SPK
ONE TOUCH OPERATION
BASS BOOST
PRO LOGIC DSP
H.PHONE AUTO MUTING TUNED STEREO
TA NEWS INFO
VOLUME
INPUT ATT
EON RDS
SLEEP
CH–
1 2
ANALOG
L
LINEAR PCM
DIGITAL
C
R
S.WFR LFE
LS
RS
S
STANDBY
STANDBY/ON
D I G I T A L
P R O L O G I C
D I G I T A L
S U R R O U N D
SURROUND
DSP
DVD MULTI
FM MODE
MEMORY
ON/OFF
FM/AM TUNING
DVD
VCR
TV SOUND
SURROUND/DSP
OFF
INPUT DIGITAL
RX–6030V
AUDIO/VIDEO CONTROL RECEIVER
INPUT ANALOG
INPUT ATT
FM/AM RESET
Changing the Source Name
When you have connected a CD recorder to the TAPE/CDR
jacks on the rear panel, change the source name to CDR so
that “CDR” appears on the display when selected as the
source.
RX-6030VBK/RX-6032VSL
RX-5030VBK/RX-5032VSL
1
Press TAPE/CDR (SOURCE NAME) on the
front panel.
• Make sure “TAPE” appears on the display.
2
Press again and hold SOURCE NAME
(TAPE/CDR) on the front panel until
“ASSIGN CDR” appears on the display.
To change the source name from “CDR” to “TAPE,” repeat
the same procedure above (in step
1, make sure “CDR”
appears on the display).
Note:
Without changing the source name, you can still use the connected
components; however, you may experience one of the following
inconveniences:
• A different source name will appear on the display when you select
the target component.
• You cannot use the digital input (see page 16) for the CD recorder.
• You cannot use the COMPU LINK remote control system (see page
29) to operate the target component.
SOURCE NAME
(TAPE/CDR)
PHONES
jack
SPEAKERS
ON/OFF
MUTING
VOLUME +/–
MASTER VOLUME
control
Remote
NOT
Front panel
Remote control
Audio source
selection buttons
Audio source
selection
buttons
10
0
10
TA/NEWS/INFO
DISPLAY MODE
Selecting Different Sources for Picture
and Sound
You can watch the picture from a video component while
listening to sound from another component.
Press one of the audio source selection buttons while
watching the picture from a video component such as the
VCR or DVD player.
• Once you have selected a video source, pictures of the
selected source are sent to the TV until you select another
video source.
RX-6030VBK/RX-6032VSL
On the front panel
From the remote control
RX-5030VBK/RX-5032VSL
On the front panel
From the remote control
SOURCE NAME
FM/AM
TAPE/CDR
CD
TAPE/CDR
CD
DVD
FM/AM
TV SOUND
VCR
ANALOG
/DIGITAL
CD
FM
AM
TAPE/CDR
SOURCE NAME
TAPE/CDR
CD
DVD
DVD MULTI
FM/AM
TV SOUND
VCR
ANALOG
/DIGITAL
DIMMER
DIMMER
SOURCE NAME
TAPE/CDR
CD
FM/AM
CD
FM
AM
TAPE/CDR
SOURCE NAME
EN11-17_RX-60_5030[C]f
02.12.24, 18:40
12