JVC RX-6030VBK - Manual (Page 20)

18
Notes:
• This button does not work when the subwoofer is set to “NO” (see
page 15). In this case, “NO SUBWOOFER” will appear on the
display for a while.
• You cannot turn off the subwoofer when the front speaker size is set
to “SMALL.”
• When you change the subwoofer from “NO” to “YES,” the subwoofer
is automatically turned on.
Reinforcing the Bass
You can boost the bass level.
Once you have adjusted the bass boost level, this receiver
memorizes the adjustment for each source.
Press BASSBOOST on the remote control to select the
bass boost function.
• Each time you press the button, the bass boost function
turns on and off.
BASSBOOST ON Select this to activate the bass boost
function.
The BASS BOOST indicator lights up on
the display.
BASSBOOST OFF Select this to cancel it.
The BASS BOOST indicator goes off.
Note:
This function affects the front speakers sound only.
DIGITAL AUTO SPK ONE TOUCH OPERATION BASS BOOST PRO LOGIC DSP H.PHONE AUTO MUTING TUNED STEREO TA NEWS INFO VOLUME INPUT ATT EON RDS SLEEP
CH–
1 2 ANALOG L LINEAR PCM DIGITAL
C R S.WFR LFE LS RS S
SETTING
STANDBY
STANDBY/ON
PHONES D I G I T A L P R O L O G I C
D I G I T A L
S U R R O U N D
SURROUND
DSP
DVD MULTI
SPEAKERS
ON/OFF
FM MODE MEMORY FM/AM TUNING
DVD VCR CD FM AM TAPE/CDR TV SOUND
SURROUND/DSP OFF
DIMMER
INPUT DIGITAL
RX–6030V AUDIO/VIDEO CONTROL RECEIVER
INPUT ANALOG
INPUT ATT
FM/AM RESET
SOURCE NAME
Attenuating the Input Signal
When the input level of the analog source is too high, the
sound will be distorted. If this happens, you need to attenuate
the input signal level to prevent the distortion.
Once this has been adjusted, this receiver memorizes the
adjustment for each source.
Press and hold INPUT ATT on the front panel so that the
INPUT ATT indicator lights up on the display.
• Each time you press and hold the button, the Input
Attenuator mode turns on (“INPUT ATT ON”) or off (“INPUT
NORMAL”).
Note:
When selecting “DVD MULTI” (RX-6030VBK and RX-6032VSL only)
as the source, this effect does not work.
Turning Off the Subwoofer
When the subwoofer is set to “YES” (see page 15), you can
choose to turn off the subwoofer.
Press SUBWOOFER OUT ON/OFF on the front panel to
turn off the subwoofer.
“SUBWOOFER OFF” appears on the display for a while and
the
S.WFR indicator goes off.
The subwoofer sound comes out of the front speakers.
To turn on the subwoofer, press the button again.
Sound Adjustments
BASSBOOST
SUBWOOFER
OUT ON/OFF
INPUT ATT
MULTI JOG
dial
Remote
NOT
Remote
NOT
REMOTE CONTROL RM - SRX 6030J
SET
ADJUST
EXIT
Front panel Remote control
RX-6030V
RX-6032V
ONLY
RX-6030V
RX-6032V
ONLY
18-23_RX-60_5030[J]f 02.11.28, 13:47 18