JBL DVD600II - Manual (Page 43)

43
Remote Control Functions
Programming Macros
Macros enable you to easily repeat frequently
used combinations of commands with the press
of a single button on the remote control. Once
programmed, a macro will send out up to 19
different remote codes in a predetermined
sequential order, enabling you to automate the
process of turning on your system, changing
devices, or other common tasks. The remote can
store up to three separate macro command
sequences: one that is associated with the Power
On Button
b, and two more that are accessed
by pressing the Macro Buttons fg.
The JBL One Click™ remote also features two
preprogrammed functions, ALL OFF
u and
ALL ON v, that turn all eight programmed
devices off or on when the appropriate key is
pressed.
1. Press the Mute Button c and the Macro
Buttons fg to be programmed or the
Power On Button b at the same time.
Note that the Program Indicator LED will
light.
2. Enter the steps for the macro sequence by
pressing the button for the actual command
step. The first step of the macro must be to
press the Input Selector
dh–j
l–o for the first device for which you
are programming a command. That will cause
the light under that Input Selector to turn on.
Although the macro may contain up to 19
steps, each button press, including those
used to change devices, counts as a step.
The Input Selector
dh–jl–o
will flash to confirm each button press as you
enter commands.
NOTE: While entering commands for Power
On/Off of any device during a macro sequence,
press the Mute Button
c. DO NOT press the
actual Power button.
3. When all the steps have been entered,
press the Macro Button bfg to
enter the commands. The Program
Indicator LED will blink three times and
then turn off.
Example: To program the Macro 1 button so
that it turns on only the DCR600
II , TV and a
Cable Box, follow these steps:
• Press the Macro 1 f and Mute c
buttons at the same time and then
release them.
• Note that the Program Indicator LED will
light.
- -
PROGRAM
INDICATOR LED
(continued)