JBL DVD600II - Manual (Page 41)

41
Configuring the DCR600
II
Receiver
7. Press the Set Button ^.
8. Select the Dolby Digital mode either by press-
ing the front panel Surround Mode Selector
7 or by pressing the Surround Mode
Selector
t on the remote until
DOLBY DIG appears in the Main
Information Display
U.
9. Press the Delay Button & on the
remote or front panel. The words
S DELAY TIME appear in the
Main Information Display
U.
10. Press the ⁄ / ¤ Buttons y on the
remote once, so that C DELAY TIME
appears in the Main Information Display
U or in the on-screen display.
11. Press the Set Button ^.
12. Press the ⁄ / ¤ Buttons y on the
remote or the Selector Buttons 5 on the
front panel until the desired delay time for
the center channel appears in the display.
13. Press the Set Button ^ to enter the
setting into the receiver’s memory.