JVC HM-DH30000U - Manual (Page 26)

26
EN
Basic
Recording
This VCR can check the tape condition during recording
(and playback), and realizes the best possible pictures.
In addition, this VCR is equipped with the Video
Navigation function, which allows you to quickly
locate the programs you have recorded on a tape.
When recording on this VCR, the tapes are
automatically numbered so that every tape recorded
on this VCR has a different tape number. With this
function, the program information such as recording
date, start time, channel number, and recording
speed are also automatically stored in the VCR’s
memory.
● For the Video Navigation function, see page 42.
To memorize the recording date and start time for
the Video Navigation function, the date and clock
must be set correctly.
D-VHS Recording
1 Load a D-VHS cassette
Make sure the record safety tab is intact. If not,
cover the hole with adhesive tape before
inserting the cassette.
● The D-VHS indicator lights on the front display
panel and the D-VHS recording mode is
selected automatically.
2
Select recording channel
On the front panel:
Press CH + or –.
On the Remote:
a– Press CH + or –.
or
b– Press the Number keys.
3
Set tape speed
Press HS/STD/LS3/SP/EP ( ) to set the
recording speed.
● The recording speed changes each time
HS/STD/LS3/SP/EP ( ) is pressed.
HS: When picture quality and sound quality is
important.
Or when recording digital HDTV.
STD: When picture quality and recording time
are important.
LS3: To record for three times longer than in
STD mode, with picture quality that is
equal to or better than S-VHS.
4
Start recording
On the front panel:
Press REC (
¶ ).
On the Remote:
While holding REC (
¶ ), press PLAY ( 3 ).
Turn on the VCR and the TV, and select the AV
mode on the TV.
1
1 2 3
4 5 6
7 8 9
0
VCR TV CABLE/DBS
STOP ( 7 )
FF ( ¡ )
REW (
1 )
3
2
– a
4
2
– b
POWER
PAUSE ( 8 )
BASIC PLAYBACK AND RECORDING (cont.)
2
3
4
STOP/EJECT
( 7 / 0 )
POWER
D-VHS
NOTES:
● You can select HS/STD/LS3 mode in step 3 also when
recording from another D-VHS digital recorder or a
camcorder equipped with DV connector.
● When recording from the devices other than the D-VHS
digital recorder or the camcorder connected using the i.LINK
connector, the recording speed will be selected automatically.
The recording will be made in either HS or STD mode
according to the amount of data input (the transfer rate) from
the i.LINK connector. When you want to record in another
mode, record from analog input (using a connector other than
the i.LINK connector).