JVC HM-DH30000U - Manual (Page 13)

EN
13
Tuner Setting
Setting channels automatically
— Auto Channel Set
Use Auto Channel Set only if channels have not been set
correctly by the Plug & Play setting. If you want to add
or delete channels, and want to use the ghost reduction
function, use Manual Channel Set (
੬ pg. 14).
1 Access Main Menu screen
Press MENU.
2 Access Tuner Set Up screen
Press %fi to move the
highlight bar (arrow) to
“TUNER SET UP”, then
press OK.
3 Perform Auto Channel Set
You can automatically
set the receivable
channels in your area in
the order of their
frequencies.
Press
%fi to move the
highlight bar (arrow) to
“AUTO CHANNEL SET
UP”, then press OK.
NOTES:
● When Auto Channel Set
is complete, “SCAN
COMPLETED” appears
on screen.
● If the scan was
unsuccessful, “SCAN COMPLETED–NO SIGNAL”
appears on screen. Check the
connections and start again.
4 Return to normal screen
Press MENU.
INFORMATION
The VCR selects the correct band (TV or CATV)
automatically during Auto Channel Set.
The selected band will be displayed on the right side of
“BAND” on the Tuner Set Up screen.
Turn on the VCR and the TV, and select the AV
mode on the TV.
AUTO CHANNEL SET UP
SCANNING...
PRESS (MENU) TO END
1 2 3
4 5 6
7 8 9
0
VCR TV CABLE/DBS
1 4
2 3
2 3
MAIN MENU
VIDEO NAVIGATION
FUNCTION SET UP
3 TUNER SET UP
INITIAL SET UP
i. LINK SET UP
PRESS ( 5∞), THEN (OK)
PRESS (MENU) TO END
TUNER SET UP
BAND CATV
3 AUTO CHANNEL SET UP
MANUAL CHANNEL SET
GUIDE CHANNEL SET
CABLE BOX SET UP
DBS RECEIVER SET UP
PRESS (
5∞), THEN (OK)
PRESS (MENU) TO END