JVC HM-DSR100U - Manual (Page 109)

Page 5-17
R
ECORDING
F
EATURES
Various features are provided to make video taping an easy and sure process.
R
ECORDING
O
NE
P
ROGRAM
W
HILE
W
ATCHING
A
NOTHER
To watch a broadcast or cable TV channel while recording another program using the built-
in VCR, do the following:
VCR Features
Recording Features
5
1. During recording, press the TV/VCR button.
ࡗ If you are using the RF connection (see p. 7-22)
to view the output from your recorder, the
TV broadcast being recorded disappears.
ࡗ If you are using the AV connection (see p. 7-23)
to view the output from your recorder, change
the TV's input mode from AV to TV.
2. Use the TV's channel selector to choose the
channel you want to watch.
Notes:
ࡗ If you have connected the recorder to your TV via RF connection and the picture
being received appears distorted, press the Mode button until the remote is in the SAT
mode, and then press the TV/VCR button.
ࡗ It is not possible to view one satellite channel while watching another satellite channel.
Remote
Menu Options
Buttons
TV/VCR
D
ISPLAY
E
LAPSED
R
ECORDING
T
IME
To see the elapsed time of a recording that is taking place, do the following:
1. Before recording starts, press the Counter
Reset button.
ࡗ The counter resets to zero and displays the
exact elapsed time as the tape runs.
2. During recording, press the View button
at any time to see the elapsed time. All
indications corresponding to the current
status of the VCR are displayed for
5 seconds.
Notes:
ࡗ Make sure that Superimpose is turned on (see Superimpose on p. 5-12).
ࡗ The indications are not recorded.
Remote
Menu Options
Buttons
RECALL
COUNTER RESET
VIEW