JVC CA-D752TR - Manual (Page 8)

4
English
CAUTION: Make all connections before plugging the Unit into an AC power outlet.
Connecting the FM Antenna
A. Using the Supplied Wire Antenna
The FM Wire Antenna provided can be connected to a FM 75-ohm
COAXIAL as temporary measure.
Extend the supplied wire antenna horizontally.
B. Using the Standard Type Connector
(Not Supplied)
A standard type connector (IEC or DIN 45325) should be connected to
the FM 75-ohm COAXIAL terminal.
If reception is poor,
connect the outside
antenna.
CAUTION: To avoid noise, keep antennas away from metallic parts of the System, connecting
cord and the AC power cord.
Connecting the AM (MW/LW) Antenna
ANTENNA
FM 75
COAXIAL
AM LOOP
GND
AM EXT
ANTENNA
FM 75
COAXIAL
AM LOOP
GND
AM EXT
ANTENNA
FM 75
COAXIAL
AM LOOP
GND
AM EXT
A
B
Before attaching a 75-ohm coaxial lead (the
kind with a round wire going to an outside
antenna), disconnect the supplied FM Wire
Antenna.
Outside FM Antenna Wire
FM Wire Antenna
Snap the tabs on the
loop into the slots of
the base to attach the
AM Loop.
If reception is poor, connect the outside antenna.
AM Antenna Wire (not supplied)
ANTENNA
FM 75
COAXIAL
AM LOOP
GND
AM EXT
1 2 3
AM Loop Antenna
Note: Even when
connecting an outside AM
antenna,
keep the indoor AM loop
connected.
Turn the loop until you
have the best reception.
EN.CA-D752TR[E]/F 23/4/98, 2:41 pm 4