beautypg.com

Setting the daily timer – JVC CA-D752TR User Manual

Page 41

background image

37

English

Setting the Daily Timer

With this timer you can wake up to music from a CD, tape, your favourite radio program.

You can set the Daily Timer whether the Unit is on or off.

Procedure For Setting the Daily Timer

1. Press TIMER/CLOCK so that “DAILY” appears on the display.

The DAILY indicator flashes on the display.

Each time you press the button, the timer setting indication changes as follows:

DAILY

=

ON TIME

(flashes)

=

REC

=

ON TIME

(flashes)

= Clock setting = Cancelled

(current source)

= (back to the beginning)

Note:

If the clock has not been set, even if TIMER/CLOCK is pressed you cannot select the Daily

Timer.

2. Press TIMER/CLOCK again.

After “ON TIME” flashes for 2 seconds, it switches to the on-time setting display.

3. Set the time you want the Unit to turn on.

Press

4 P. DOWN or ¢ P. UP on the MULTI CONTROL to adjust the hours and press SET .

Then press

4 P. DOWN or ¢ P. UP to adjust the minutes and press SET.

After adjusting the minutes and pressing SET, “OFF TIME” flashes for two seconds and on-time
setting is completed.

4. Set the time you want the Unit to turn off.

Press

4 P. DOWN or ¢ P. UP on the MULTI CONTROL to adjust the hours and press SET.

Then press

4 P. DOWN or ¢ P. UP to adjust the minutes and press SET.

When the off-time has been set, the indication on the display changes to the source selection.

To select the source to be played, press

4 P. DOWN or ¢ P. UP on the MULTI CONTROL

until your choice is shown.

5. Select the source you want to listen to.
To use a CD as the source:

1. Press

4

P. DOWN or

¢

P. UP on the MULTI CONTROL repeatedly until

“- CD - - -” flashes on the display and press SET.

2. Press

4

P. DOWN or

¢

P. UP on the MULTI CONTROL repeatedly to select the

CD disc number to be played and press SET.

If you press SET without selecting a disc, the last disc played by the Unit will be used.

3. Press

4

P. DOWN or

¢

P. UP on the MULTI CONTROL repeatedly to select the

CD track number to be played and press SET.

If you press SET without selecting a track, playback will start from the first track on the CD.

\

Flashing

\

\

EN.CA-D752TR[E]/F

23/4/98, 2:41 pm

37