JVC CA-D752TR - Manual (Page 34)

30
English
Regular Play
When the power is already on, you can use this basic procedure:
1. Press down 0 for the deck you want to use.
2. When the cassette holder opens, put a cassette in, with the
exposed part of the tape down, toward the base of the Unit.
• If the cassette holder does not open, turn the power off, then back on and press down 0 again.
3. Close the holder gently.
When both Deck A and Deck B contain a tape, the last deck to have a tape inserted is selected.
To change the selected deck, press DECK A/B. When using the Remote Control, press TAPE A or
TAPE B.
4. Press TAPE
™ £ on the Unit.
COMPU PLAY
When the TAPE ™ £ is pressed while the power is on standby, the power is automatically turned on.
When using the Remote Control, first press TAPE CONTROL followed by
3.
If the power is on standby, the power will automatically be turned on.
When “TAPE” appears on the display, the tape play starts toward the direction currently selected.
To stop playing, press 7 STOP on the Unit (or 7 on the Remote Control).
To remove the tape, stop the tape, and press down
0.
To change deck while playing a tape, press TAPE ™ £ after pressing DECK A/B on the Unit or
press 3 after pressing TAPE A or TAPE B on the Remote Control.
To change the direction of a tape while it is playing, press TAPE ™ £ on the Unit or
DIRECTION on the Remote Control.
Fast Left and Fast Right ——————————————————
While the tape is stopped, press TUNING DOWN 1 on the MULTI CONTROL (or 1 on the
Remote Control) and the tape will wind rapidly to the left side of the cassette without playing.
While the tape is stopped, press
¡ TUNING UP on the MULTI CONTROL (or ¡ on the Remote
Control) and the tape will wind rapidly to the right side of the cassette without playing.
Note: Deck A and Deck B cannot be used for playback at the same time.
Music Scan
To find the beginning of a music track during play, use the Music Scan function. Music Scan searches for
blank portions that usually separate selections, then plays the next selection.
Finding the Beginning of the Current Selection —————
Press TUNING DOWN 1 or ¡ TUNING UP on the MULTI CONTROL
(or 1 or ¡ on the Remote Control) during play.
Make sure that you press TUNING DOWN 1 or ¡ TUNING UP on the MULTI CONTROL (or
1 or ¡ on the Remote Control) in the opposite direction to that in which the tape is playing.
Searching stops at the beginning of the current selection, and the current selection starts
automatically.
Finding the Beginning of the Next Selection ———————
Press TUNING DOWN 1 or ¡ TUNING UP on the MULTI CONTROL
(or 1 or ¡ on the Remote Control) during play.
Make sure that you press TUNING DOWN 1 or ¡ TUNING UP on the MULTI CONTROL (or
1 or ¡ on the Remote Control) in the same direction as that in which the tape is playing.
Searching stops at the beginning of the next selection, and the next selection starts automatically.
or
EN.CA-D752TR[E]/F 23/4/98, 2:41 pm 30