beautypg.com

Normal dubbing – JVC HM-HDS4EK User Manual

Page 66

background image

Filename [HM-HDS4EK_05Timer.fm]

Masterpage:Left

66

Page 66

April 22, 2003 10:12 pm

EDITING (cont.)

Normal Dubbing

(from VHS to HDD)

You can dub selected scenes from a cassette to the HDD deck,
starting and stopping wherever you wish.

A

Load a cassette.

Insert a cassette with the record safety tab intact.

B

Prepare the VHS deck for dubbing.

A Slide TV/CABLE/SAT to the right, then press S-VHS

and select the programme to be dubbed. You can
select the programme by VCR Navigation. (

pg. 36)

B Press VCR PR+/– to set the channel other than “DUB”.

● Set “PICTURE CONTROL” to “EDIT” (

pg. 81).

C

Locate the start point.

A Search for the point where you want to start dubbing

by pressing 4, 5 or 3 then press 8.

B Press 3 a little, then press 4 to start playback.

C Press 9 to pause playback a little before the start

point.

D

Prepare the HDD deck for dubbing.

A Press HDD.

B Press VCR PR+/– to set the channel “DUB”.

C Press MODE to select recording speed.

E

Start dubbing.

A Press S-VHS and

4

to start playback.

B Press HDD and

7

(

7

and

4

on the remote control) to

start dubbing.

● To enter Record-Pause mode, press and hold

7

and press

9

on the remote control. To resume recording, press and hold

7

and press

4

on the remote control.

F

End dubbing.

Press

8

twice. Then press S-VHS and press

8

.

NOTES:

There may be a discrepancy of several seconds between where

you intend editing to start, and where it actually starts.

The superimposed indication during the operation or dubbing

is not recorded.

For HDD deck, the recording pause takes effect only when the

recorder is recording on the HDD deck with the channel set to
“L-1”, “F-1”, or “DUB”. The recording pause is released in 5
minutes automatically. Picture and sound may be distorted at
the point where the recording pause is released.

Dubbing copyright guarded tape is not possible.

When you select “EDIT” to dub tapes in step B, be sure to

select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”)
after you finish dubbing the tapes.

?

HM-HDS4EK.book Page 66 Tuesday, April 22, 2003 10:14 PM