JVC HM-HDS4EK - Manual (Page 17)

Masterpage:Right-Full-NoTitle0
17
Filename [HM-HDS4EK_04Basic.fm]
Page 17 April 24, 2003 12:19 pm
Results of Auto Set Up/Preset Download appear on the front display panel
If both Auto Channel Set and Auto Clock Set have been performed successfully, the
correct current time is displayed.
Turn on the TV and select its AV mode, then make sure that all necessary stations have been stored
in the recorder’s memory by using the VCR PR button(s).
● If station names (ID – ੬
pg. 91) have also been stored in the recorder’s memory, the station name
will be displayed at the top left corner of the TV screen for about 5 seconds when the recorder is
tuned to a different station.
● If you want to set the tuner manually such as to add or skip channels, to change channel
positions, or to set or change station names, see pages 88 – 91.
If Auto Channel Set has succeeded but Auto Clock Set has not, “1” (channel position) is
displayed.
A Turn on the TV and select its AV mode, then make sure that all necessary stations have been
stored in the recorder’s memory by using the VCR PR button(s).
● If station names (ID – ੬
pg. 91) have also been stored in the recorder’s memory, the station name
will be displayed at the top left corner of the TV screen for about 5 seconds when the recorder is
tuned to a different station.
● If you want to set the tuner manually such as to add or skip channels, to change channel
positions, or to set or change station names, see pages 88 – 91.
B Perform “Clock Set” on page 84.
If both Auto Channel Set and Auto Clock Set have failed, “– –:– –” is displayed.
Make sure the cables are connected properly and turn off the recorder’s power once, then turn the
recorder’s power back on again.
Perform “Auto Set Up” on page 14 or “Preset Download” on page 16 again.
IMPORTANT
● To check if the Guide Program numbers have been set correctly, perform the VIDEO P
LUS + Timer Programming (
੬
pg. 46).
● In certain reception conditions, station names may not be stored correctly, and auto Guide Program Number Set may not work
properly. If the Guide Program numbers are not set properly when you timer-record a TV programme using the VIDEO P LUS +
system, the recorder will record a TV programme of a different station. When programming the timer using the VIDEO P LUS +
system, be sure to check the desired channel is selected correctly (
੬
pg. 46, “VIDEO P LUS + ® Timer Programming”).
● Your video recorder memorizes all detected stations even if reception of some of them is poor. You can delete those stations with
an unacceptable picture (
੬
pg. 89, “Delete A Channel”).
INFORMATION
Just Clock
Your recorder is equipped with the Just Clock function which provides accurate time keeping through automatic adjustments at
regular intervals, by reading data from a PDC signal. If you want to take advantage of this function, simply set it to “ON”
(
੬
pg. 84, “Just Clock”).
If you have any difficulty with the above procedures call the JVC Customer Service Hot Line
on 0870 330 5000
HM-HDS4EK_04Basic.fm Page 17 Thursday, April 24, 2003 12:19 PM