JVC HM-HDS4EK - Manual (Page 25)

Masterpage:Right-NoTitle0
25
Filename [HM-HDS4EK_04Basic.fm]
Page 25 April 22, 2003 10:12 pm
Scan for Beginning of Programme (or
Play List)
You can scan the beginning of the programme (or play list) easily
with the HDD Navigation. For details of the play list, refer to
“Play List Features” (
੬
pg. 60).
A
Turn on the recorder.
Press 1.
B
Select the HDD deck.
Press HDD.
C
Access the Index screen.
On the recorder
Press NAVIGATION.
On the remote control
A Press NAVIGATION. The HDD Navigation screen
appears.
B Press
w e
to move the arrow to “REC LIST”, then press
OK.
● When you wish to play back a play list, select “PLAY LIST”,
then press OK.
D
Select the programme.
● When you wish to play back a programme during recording
from the beginning, press w r e t to move the arrow to the
top left corner index of the recording programme.
E
Start playback.
Press
w e
to move the arrow to “BEGINNING”, then
press OK again.
● To repeat playback of a selected programme (or play list), refer
to “Repeat Playback” (
੬
pg. 32).
F
Pause playback.
Press 9.
● To resume normal playback, press 4.
G
Stop playback.
Press 8.
● To resume playback from the point where playback was
previously stopped, press w e to move the arrow to
“RESUME”, then press OK.
● Turn on the TV and select the AV mode.
● Slide TV/CABLE/SAT switch to the right.
● If the recorder is turned on with HDD deck selected,
there may be about 30 seconds’ delay in starting to
show pictures on the screen.
?
On the recorder
Turn the JOG dial to select
the programme (or play list),
then press the JOG dial.
On the remote control
Press
w r e t
to move the
arrow on the index (small
still pictures) of the desired
programme, then press OK.
HM-HDS4EK.book Page 25 Tuesday, April 22, 2003 10:14 PM