JDS Uniphase WEB XPANDER RS-232 User Manual
Page 33

v1.6d 3-Aug-2003
•
Modified DHCP routines. WebX was correctly reading IP address but incorrectly
reading and storing Gateway and DNS info.
•
Also read SMTP Mail server via DHCP if provided
v1.6e
8-Aug-2003
•
Modified DHCP routines to try to solve remaining issues.
v1.6f 21-Aug-2003
•
Adjusted TCP socket handling to prevent "hung" sockets
v1.6g 3-Sep-2003
•
Corrected DHCP issue where Gateway was being misread
v1.7 9-Sep-2003
•
Added support for Pocket WebX Access and Registration
v1.8d 19-Oct-2003
•
Local caching of device status started (X10, Flags, Relays, Variables)
•
"Bounce" network before time sync and periodically to clear any hung network
sockets
•
New WebX Labeler sends device type (Lamp, Lamp-ExCode, Appliance, etc.)
so internal status can be set properly after 'All Lights On', 'All Lights Off',
'All Units Off' commands
•
Track time of last WebX activity and automatically reboot every 24 hours but not
within 15 minutes of last command
v1.8e 24-Oct-2003
•
Adding more cleanup and optimization around timesync and general networking
•
Added status messages to Com1 which can be monitored in the WinEVM
MegaController window
v1.8f 3-Nov-2003
•
Pocket WebX Support (Fixed Relay status)
•
Added Digital and Analog status
v1.8g 10-Nov-2003
•
Fixed SMTP bug where LF was used instead of CR,LF
•
Disabled periodic network "bounce" and only reset network on failed TimeSync
or Email
•
Pocket WebX Support for All Lights On, All Lights Off
v1.9 21-Nov-2003
•
Added FTP timeout to reset FTP server if connection is unexpectedly lost
•
Made device status available over HTTP as well as FTP