JVC GR-DVX48A - Manual (Page 70)

70
EN
MAKE CONNECTIONS
Also refer to pg. 22 and 23.
1 A JVC VCR equipped with a Remote PAUSE
connector . . .
... connect the editing cable to the Remote
PAUSE connector.
A JVC VCR not equipped with a Remote
PAUSE connector but equipped with an R.A.
EDIT connector . . .
... connect the editing cable to the R.A.EDIT
connector.
A VCR other than above . . .
... connect the editing cable to the remote
control’s PAUSE IN connector.
2
Insert a recorded tape into the camcorder. Set the
VIDEO/DSC Switch to “VIDEO” (GR-DVX78 only),
then set the Power Switch to “
” while pressing
down the Lock Button located on the switch.
3
Turn the VCR power on, insert a recordable tape and
engage the AUX mode (refer to the VCR’s instructions).
NOTES:
● Before Random Assemble Editing, make sure the
indications do not appear on the TV monitor. If they
do, they will be recorded onto the new tape.
To choose whether or not the following displays appear
on the connected TV . . .
•Date/Time
.... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the
Menu Screen ( ੬ pg. 42, 43).
•Time Code
.... set “TIME CODE” to “ON” or “OFF” in the Menu
Screen (
੬ pg. 42, 43).
•Playback Sound Mode, Tape Speed And Tape Running
Displays
.... set “ON SCREEN” to “LCD” or “LCD/TV” in the
Menu Screen (
੬ pg. 42, 43). Or, press DISPLAY on
the remote control.
● For GR-DVX78 Owners: Make sure to set “S/AV INPUT”
to “OFF” in the Menu Screen (
੬
pg. 42).
● When editing on a VCR equipped with a DV input
connector, an optional DV cable can be connected
instead of an S-Video cable and audio/video cable.
USING THE REMOTE CONTROL UNIT (cont.)
DISPLAY
To Remote
PAUSE or
R.A.EDIT
VCR
TV
To PAUSE IN
Editing
cable
(provided)
S-Video
cable
(optional)
Audio/Video
cable
(provided)
* Connect when an S-Video cable is not used.
** When connecting cables, open this cover.
*** EDIT: GR-DVX78
JLIP: GR-DVX49/DVX48
**** AV IN/OUT: GR-DVX78
AV OUT: GR-DVX49/DVX48
To JLIP***
or EDIT***
To S-VIDEO
For GR-DVX49/DVX48 Owners:
ATTENTION FOR EDITING CABLE
Make sure you connect the plug which has
3 rings around the pin to the camcorder.
To AV IN/OUT****
or AV OUT****
Connector cover**
To AUDIO,
VIDEO* and
S-VIDEO␣ IN
connectors