JVC GR-DVX48A - Manual (Page 55)

EN
55
F LA J. D A H S – + 2
PLA
Y OFF
Flash Brightness Adjustment
(GR-DVX78 only)
When a snapshot ( ੬ pg. 26, 50) is taken in the dark the
camcorder fires the flash (
੬ pg. 54) and adjusts the
brightness automatically. You can also adjust the flash
brightness manually. When you find that the snapshots
you took look too bright or too dark, adjust it manually.
1 Set the Power Switch to “ ” while pressing down
the Lock Button located on the switch. Open the
LCD monitor fully or pull out the viewfinder fully.
2
Press the MENU Wheel in. The Menu Screen
appears.
3 Rotate the MENU Wheel to select “ MANUAL”,
and press it. The MANUAL Menu appears.
4
Rotate the MENU Wheel to select “FLASH ADJ.”, and
press it. The parameter appears.
5 To intensify the flash, rotate the MENU Wheel
towards “+”. To weaken the flash, rotate it towards
“–”. Adjustment range: –3 to +3.
6
Press the MENU Wheel in. Rotate it to select
“ RETURN” and press it twice to close the Menu
Screen.
NOTE:
When you change the subject you are shooting or the
shooting location, set it back to ±0 as described in step 5
and take a snapshot to check the flash brightness. After
doing this adjust to your desired brightness.
Power Switch
MENU Wheel
MANUAL Menu
Display
Lock Button