JVC GR-DVX48A - Manual (Page 36)

36
EN
PL
AY
OF
F
FO MAT R
FO MAT R
EX ST I NG I
ERASE
F I LE ? S
AL L
EXECUTE
– CANCEL
T PROTEC
DELE E
T
DPOF
AT FORM
N RETUR
CANCEL
EXECUTE
D.S.C. PLAYBACK (cont.)
MENU Wheel
Power Switch
Display
Initialising A Memory Card
You can initialise a memory card anytime.
After initialising, all files and data stored in the memory
card, including those which have been protected, are
cleared.
1 Set the VIDEO/DSC Switch to “ ”, then set the
Power Switch to “ ” while pressing down the
Lock Button located on the switch. Open the LCD
monitor fully or pull out the viewfinder fully.
2 Press the MENU Wheel in. The Menu Screen
appears.
3 Rotate the MENU Wheel to select “ MEMORY”
and press it. The MEMORY Menu appears.
4 Rotate the MENU Wheel to select “FORMAT” and
press it. The Confirmation Screen appears.
5 Rotate the MENU Wheel to select “EXECUTE” and
press it. The memory card is initialised. When
initialisation is finished, “NO FILES STORED” or
“NO SOUND FILES” appears.
•To cancel initialisation, rotate the MENU Wheel to
select “CANCEL” and press it.
CAUTION:
Do not perform any other operation (such as turning
off the camcorder) during initialisation. Also, be sure
to use the provided AC Adapter, as the memory card
may be corrupted if the battery becomes exhausted
during initialisation. If the memory card becomes
corrupted initialise it.
MEMORY Menu
Lock Button
Confirmation
Screen
VIDEO/DSC Switch