Track selection, Repeat playback, Operations on dvd deck (cont.) – JVC HR-XVC37U User Manual
Page 64: Select the mode
Filename [XVC37U_08DVD.fm]
Masterpage:Left+
64
EN
Page 64
16 June 2004 5:54 pm
OPERATIONS ON DVD DECK (cont.)
Track selection
To start playback by specifying the track number
A
Press the number keys (0-10, +10) to enter
the track number.
● The entered number appears in the track number indication
and playback starts from the track you have specified.
Example:
To select 3:
Press 3.
To select 14:
Press +10, then 4.
To select 20:
Press +10, then 10.
Or press +10 twice, then 0.
To select 24:
Press +10, +10, then 4.
To select 110:
Press +10 ten times, then 10.
To select 150:
Press +10 fourteen times, then press 10 once.
NOTE:
You cannot select 150 even if you press +10 fifteen times, then
press 0 once.
Repeat Playback
You can repeat playback of the current group, track or all groups.
● While MP3 control display is on the TV:
A
Select the mode.
Press REPEAT to select the desired repeat mode.
● Each time you press REPEAT, the mode changes as follows:
TRACK]GROUP]ALL]OFF (No indication)](Back to the
beginning)
● To stop Repeat Playback, press STOP (8).
● To cancel Repeat Playback, press REPEAT repeatedly until the
repeat mode display disappears on the TV screen.
● You can also quit Repeat Playback in the following cases:
• Press OPEN/CLOSE (x) to open the disc tray.
• Turn off the unit.
To return to the MP3 control display
Press STOP (8).
TRACK
:
The current track is played back
repeatedly.
GROUP
:
All tracks of the current group are
played back repeatedly.
ALL
:
All tracks are played back
repeatedly.
OFF (no indication):
Each track is played back once.
XVC37U_01.book Page 64 Thursday, June 17, 2004 9:16 AM